Hello to all Pier 3 members,
last year there was an attempt to make a 2x2 mosaic of the Andromeda Galaxy. Unfortunately we did not manage to do this one. Only one panel could be completed. The other three panels were always missing at least one color channel. I would like to complete this mosaic this year. However, I am not sure if we have gotten any new members since then.
Therefore I wanted to ask for your opinion. Would you rather start the mosaic all over again or is it enough if we only include the missing color channels? We also have to remember that the camera was working in 2x2 binning mode at the time. Now it works in 1x1 binning. I don't know if it is possible to combine the data well.
CS
Darius
Darius,
No worries, I just got back from Japan and busy myself catching up on everything at home.
I am missing the following datasets:
2113
2114The only complete channel I have is the Luminance channel.
Daniel
Okay, all right.
I will upload the two datasets tomorrow.
Once the upload is complete, I'll get back to you via private message.
CS
Darius
Hello Daniel,
Sorry for the late reply. I had a lot to do in the last days. These are all the datasets for the M31 mosaic that I have. Which ones are you missing?
PS: I just submitted an additional job, because the position of the additional data for panel 4 does not match the original data.
CS
Darius
Hello all,
I have uploaded all datasets from the M31 Mosaic.
Panel 1: https://www.dropbox.com/s/vic9jws4f1ktysp/1754%20p3%20m31%201%20833.zip?dl=0
Panel 1 (red channel): https://www.dropbox.com/s/nzc4kcoo83qgmiy/1898%20p3%20m31%201%20red%20833.zip?dl=0
Panel 2: https://www.dropbox.com/s/febsxppmuhyjzyv/1755%20p3%20m31%202%20833.zip?dl=0
Panel 3: https://www.dropbox.com/s/cj6gztp99bfoj8z/1756%20p3%20m31%203%20833.zip?dl=0
Panel 4: https://www.dropbox.com/s/8cy0tudni81hjl2/1757%20p3%20m31%204%20833.zip?dl=0
I have already sorted out the bad subs. Panel 3 had a lot of bad subs in it. Some of them I wasn't sure if you can still use them. You'll have to look through them yourself and decide which ones you want to use.
I would include the following additional data for the Mosaic:
Panel 1: 30x180s Ha
Panel 2: 30x60s Blue, 60x60s red, 30x180 Ha
Panel 3: 60x60s Red, Green, Blue, 30x180s Ha
Panel 4: 60x60s Blue and Green, 30x180s Ha
What is your opinion?
CS
Darius
Hi Earle,
30x180s for Ha sounds good to me. I am in the process of uploading the old datasets. As you mentioned, the red channel for panel 3 is bad. I left it in the dataset anyway because I am unsure if you can use it. Nevertheless, I think we should retake the red channel for Panel 3.
CS
Darius
Hi Darius,
Of course the coordinates are there; I hadn't thought of that. I've gone through plates 2,3 and 4 to check the quality; The green and red on plate 3 are poor and there are some missing sets.
What do you think about Ha exposures? The RGB are 60x60s; would 30x180s sound reasonable?
CS, Earle
Hi Earle,
you can see the coordinates in the syndicate submissions list. I already have the coordinates figured out and will attach them as a screenshot to this reply. I will upload the old datasets in the course of next week. To save space on the cloud storage, I will check all datasets before uploading and sort out the bad subs and upload only the good ones. Once all datasets are uploaded, I will provide the links in this chat.
CS
Darius
Hi Daraius,
I see that Ray gave a thumbs up to the suggestion of completing the four panel Andromeda with Ha. Why don't we just do that.
Do you wan to upload the requests? I can but need the coordinates for pane 1.
By thee way, have you checked the existing data to see if any needs repeating? I didn't becaus I only had partial data.
CS, Earle
Hi Darius
I am of two minds here. Probably many of us have M31 images taken with wider field scopes.
What makes the 3x3 project attractive is the resolution of the system (0.7 "/px at 1x1 binning) The 3x3 gives better coverage of the galaxy. I guess your 2.5 h/panel is 30 m RGB and 60 L, which will work if the subs are good.
We could simply add what is missing from the previous project. From what I have, 1755 (Panel 2) has LRGB, 1756 LRG and 1757 LR, so only three sets are missing, 2xB and 1xG. I don't have 1754. If we can share these with other members (?) we could finish the earlier project.
A suggestion would be to complete the earlier 2x2 project but add Ha to bring out the star forming regions. Given what is already done, this might be the most effective option.
Thoughts?
Anyone else have inputs?
CS, Earle
This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device.
You have declined cookies. This decision can be reversed.
FLI
656 Imaging
10 Micron
Planewave
ZWO
Roboscopes
802 Kingsbury Road
Birmingham
B24 9PS
United Kingdom
This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device.