Phil
Because of the change of camera, a complete set of darks, flats and bias frames will need to be generated. I am requesting some actual data. This way the equipment upgrade can be validated while people are still at site and if any issues emerge they can be rectified.
As you will be aware from my recent Help Desk tickets (Pier 3 darks and Pier 12 L flats), quality of calibration frames is an area where testing and inspection would be beneficial.
Dave
Because of the change of camera, a complete set of darks, flats and bias frames will need to be generated. I am requesting some actual data. This way the equipment upgrade can be validated while people are still at site and if any issues emerge they can be rectified.
As you will be aware from my recent Help Desk tickets (Pier 3 darks and Pier 12 L flats), quality of calibration frames is an area where testing and inspection would be beneficial.
Dave
Pier 12 is having a camera upgrade. This will require a new set of calibration frames to be generated. Would it be possible to make available an LRGB and Ha/OIII/SII data set available to test the upgrade while there are people on-site?
Dave
Dave to be honest we simply did not have the time for imaging or the weather for that matter while we were away on this trip. to many mechanical work needed doing
however we did managed the darks and the bias frame and are now part way though the flats also. they should all be finished for when the weather breaks
Steve
Please ignore my dylexia wherever possible, just be thankful I can control my Tourettes ;)
Things to do, so little time!
Steve
Roboscopes Tea Boy
- Page :
- 1
There are no replies made for this post yet.
Be one of the first to reply to this post!
Be one of the first to reply to this post!
Proud to use
Resources
Company Details:
Roboscopes
802 Kingsbury Road
Birmingham
B24 9PS
United Kingdom
