Hi,
something seems to go wrong in transmitting data for download?! Beside job 1902 there´s also missing data in Job 1939 M99 requested by Manuel - only Luminance and red data, no G&B data although being requested.
Didn´t check all of the datasets, maybe there´s more missing data?
CS, Martin
Hi Martin,
given that there will be a major change on Pier1, i.e. camera change, I have gone through all my submissions and informed Steve of the "fate" of some Requests.
a. Requests that have not started -> do not start before camera change.
b. Requests that have not reached a threshold, i.e. 50% -> stop and restart after the camera change. Reason is that time would not suffice to finish these requests before the camera change.
c. Requests closer to completion -> try to finish before the camera change, weather-willing of course.
I hope this clarifies matters for you.
All the best
Manuel
Manuel
Roboscopes General Technical
FYI, here is the table corresponding to my previous message:
Subject Name / Submission | Amount Completed | When | Action if possible before camera change | Action if not possible before camera change |
1636 p1 m1 1169 | 40.00% | Submitted when binning was 2x2 | Complete | Share available subs - do not restart |
1836 p1 ngc1333 1169 | 94.10% | Submitted when binning was 2x2 | Complete | Share available subs - do not restart |
1895 p1 Running man 1 1169 951 | 50.00% | Submitted when binning was 1x1 | Complete | Share available subs - do not restart |
1936 p1 m58 1169 | 0.00% | Start only after camera change | ||
1937 p1 m88 1169 | 0.00% | Start only after camera change | ||
1938 p1 m90 1169 | 0.00% | Start only after camera change | ||
1939 p1 m99 1169 | 85.00% | Submitted when binning was 1x1 | Complete | Share available subs - do not restart |
1940 p1 m100 1169 | 25.00% | Deprioritize and restart after camera change | ||
1941 p1 m109 1169 | 35.00% | Deprioritize and restart after camera change | ||
2023 p1 PPN 1169 | 35.00% | Deprioritize and restart after camera change |
Manuel
Roboscopes General Technical
Manuel,
I agree with your suggested next steps. Nevertheless I am quite worried about some - until now unknown - root cause(s) in the process of data sharing where either data gets lost and / or jobs are not finished in accordance to request. This happened quite a few times lately?!
While the camera doesn´t seem to be the problem I doubt that this issue is magically gonna disappear after the camera change?! Thus, I would like Phil and Steve to take care of that issue and fix the problem. It´s quite frustrating to receive uncomplete jobs that you cannot process due to missing data. And manually doublecheck and re-insert the missing parts to the joblist. This also limits our valuable telescope time while jobs need to be repeated.
CS, Martin
FYI, here is the table corresponding to my previous message:
Subject Name / Submission Amount Completed When Action if possible before camera change Action if not possible before camera change 1636 p1 m1 1169 40.00% Submitted when binning was 2x2 Complete Share available subs - do not restart 1836 p1 ngc1333 1169 94.10% Submitted when binning was 2x2 Complete Share available subs - do not restart 1895 p1 Running man 1 1169 951 50.00% Submitted when binning was 1x1 Complete Share available subs - do not restart 1936 p1 m58 1169 0.00% Start only after camera change 1937 p1 m88 1169 0.00% Start only after camera change 1938 p1 m90 1169 0.00% Start only after camera change 1939 p1 m99 1169 85.00% Submitted when binning was 1x1 Complete Share available subs - do not restart 1940 p1 m100 1169 25.00% Deprioritize and restart after camera change 1941 p1 m109 1169 35.00% Deprioritize and restart after camera change 2023 p1 PPN 1169 35.00% Deprioritize and restart after camera change
In the case of 1939, completion was not possible. As the camera will change, I will resubmit the full request after the change.
Manuel
Roboscopes General Technical
1895 p1 Running man 1 1169 951 is part of a mosaic with the other part already being finished.
I would strongly request to finish that job due to continuousity (?) reasons before the camera change.
For other already started jobs it depends on whether or not all filtersets are available in the current data?
Again, it doesn´t make sence to stop at 50% data if only Lum and red channel are available?!
This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device.
You have declined cookies. This decision can be reversed.
FLI
656 Imaging
10 Micron
Planewave
ZWO
Roboscopes
802 Kingsbury Road
Birmingham
B24 9PS
United Kingdom
This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device.