Latest Announcement: Roboscopes are moving over to a monthly payment system for Memberships & Syndicates View Post
  Sunday, 30 October 2022
  3 Replies
  564 Visits
0
Votes
Undo
  Subscribe

Hi Steve, 

When you're back at work next week after your short vacation in Spain, would you please answer a few questions. 

First, to tie up a loose end. Although it will not let you do so when you select it, in the list of piers that can be booked hourly, pier 7 (hosted) is still appearing in that list.

1) Would you let us know which syndicate piers require new flats, that is those which were worked on. I'm assuming these are just piers 2 and 14. We were informed earlier that pier 1 would be binned 1x1 and new flats were already being done for that. 

2) When the weather gods eventually decide to give us a break in the clouds, then if 1) above is correct  can we assume the syndicate piers 3 and 5 will just continue from where they were prior to the visit. In the post informing us of the planned visit collimation tweaks to pier 5 were mentioned, which one might assume would require new flats. Can you please confirm whether the tweaks were carried out or not.

3)  I'm not part of the pier 1 syndicate but what is the situation regarding the current pier queue. Should they all be reset to 0% completed after making the jobs partly completed available to the members. 

4) Subject to the successful carrying out of final calibrations and testing here, was the setup of pier 15 completed in Spain? If so, can you please give us an idea of the hourly cost. Is it the 200mm f4 Askar with the full frame 6200 sensor?

5) Was pier 12 fitted with a new camera?

If anyone thinks of anything else regarding the visit you would like to ask, please add it here. 

Cheers, 

Ray 

 

 


Ray
Roboscopes Guinea Pig


1 year ago
·
#5581
0
Votes
Undo

Hi all

The weather on the last trip was not the best with it being the beginning of wet season and this hindered us greatly with some  jobs but it meant we finally got the new flat panels installed and do a lot of other much needed observatory maintenance however. We did still get most of the work on my list completed apart from collimation on Pier-5 & 6

We are still catching up on sleep after a tough few weeks work and mammoth journey back, so flats will be done over the coming week as we feel up to it.

Pier-1

  • collimation has been done
  • New flats this week
  • Pier1 has been binned 1x1 for some time now already

Pier-2

  • New Mount 10 Micron
  • collimated
  • new flat Panel
  • new flats this week
  • new mount model this week then testing

Pier-3

  • Mount service
  • new flat Panel
  • New flats this week

Pier-4

  • Replacement camera fitted under warranty
  • New Flats this week

Pier-5

  • was not touched due to weather and not enough clear skies
  • New Flats this week

Pier-6

  • New Paramount MX+
  • Needs a new model
  • New Flats this week

Pier-7

  • New camera fitted
  • New flats this week

Pier-8

  • Cleaned and serviced
  • new flat Panel
  • New flats this week

Pier-9

  • Full service strip clean
  • New 6200 mono camera
  • 3nm filters
  • Needs a new model
  • new flat Panel installed
  • New flats this week

Pier-10

  • Mount service

Pier-11

  • Optical clean
  • new flats this week

Pier-12

  • Camera was not swapped as it was not compatible with the wheel (wheel swap also on next trip)
  • new flat Panel
  • New flats this week

Pier-13

  • still in progress
  • new flat Panel

Pier-14

  • Sensor flattened
  • new flats this week

Pier-15

  • All done awaiting model and focus curves

 

FYI - what piers are currently doing what in the observatory

Current Syndicate piers are - 1, 2, 3, 5 & 14

Current Hourly piers are - 4, 6, 8, 9, 10, 11, 12

Current hosted piers are - 7, 13 & 15

 

HTH

Steve

 

 


Please ignore my dylexia wherever possible, just be thankful I can control my Tourettes ;)

Things to do, so little time!

Steve
Roboscopes Tea Boy


0
Votes
Undo

Hi Steve 

Many thanks for the comprehensive reply. :)

Cheers, 

Ray 


Ray
Roboscopes Guinea Pig


1 year ago
·
#5583
0
Votes
Undo

Hi Steve, 

When you're back at work next week after your short vacation in Spain, would you please answer a few questions. 

First, to tie up a loose end. Although it will not let you do so when you select it, in the list of piers that can be booked hourly, pier 7 (hosted) is still appearing in that list.

1) Would you let us know which syndicate piers require new flats, that is those which were worked on. I'm assuming these are just piers 2 and 14. We were informed earlier that pier 1 would be binned 1x1 and new flats were already being done for that. 

2) When the weather gods eventually decide to give us a break in the clouds, then if 1) above is correct  can we assume the syndicate piers 3 and 5 will just continue from where they were prior to the visit. In the post informing us of the planned visit collimation tweaks to pier 5 were mentioned, which one might assume would require new flats. Can you please confirm whether the tweaks were carried out or not.

3)  I'm not part of the pier 1 syndicate but what is the situation regarding the current pier queue. Should they all be reset to 0% completed after making the jobs partly completed available to the members. 

4) Subject to the successful carrying out of final calibrations and testing here, was the setup of pier 15 completed in Spain? If so, can you please give us an idea of the hourly cost. Is it the 200mm f4 Askar with the full frame 6200 sensor?

5) Was pier 12 fitted with a new camera?

If anyone thinks of anything else regarding the visit you would like to ask, please add it here. 

Cheers, 

Ray 

 

1) This has now been removed. It was a dead link left behind.

2) Piers 3 and 5 will capture datasets from the start again.

3) syndicate 1 didn't receive any partial data, as the system hasn't changed.

4) Pier 15 was completed, in Steve's answer it's listed as hosted, not hourly.

5) No.

Steve will be combing the website for any inaccuracies shortly.


Phil McCauley
Roboscopes Website Admin


  • Page :
  • 1
There are no replies made for this post yet.
Be one of the first to reply to this post!
Submit Your Response

Follow Us

Newsletter

Proud to use

  • FLI

  • 656 Imaging

  • 10 Micron

  • Planewave

  • ZWO

Company Details:

Roboscopes

802 Kingsbury Road
Birmingham
B24 9PS
United Kingdom


Roboscopes is a trading name of ENS Optical LTD ¦ Copyright© 2020 Roboscopes
Cron Job Starts